RN-OTN-8800

Product Overview

RN-OTN-8800 is a multi-port 800G Ethernet and OTN protocol analyzer for high-speed Ethernet, optical transport network, coherent module and data-center interconnect validation.

All-in-One Test Platform for 400G/800G Ethernet and OTN Protocols

RN-OTN-8800 sets a strong benchmark in flexibility and performance as a converged dual-protocol testing platform for high-speed Ethernet and Optical Transport Network (OTN). Its modular three-slot architecture allows each slot to be independently configured for different Ethernet and OTN test modules. With up to 12 x 800G ports and 9.6T aggregate capacity, it supports full line-rate parallel testing and mixed-rate applications for data centers, carrier networks, communications equipment and optical module manufacturing.

• Rich interfaces: up to 12 ports and support for 14 types of optical modules.
• Coherent optical module testing for 800ZR, 400ZR and 100ZR class applications.
• Multi-user sharing and touchscreen operation.
• 800G OTN testing with OTL 4.1 / FOIC 1.1 and 112G SerDes.
• Up to 3x CFP2-DCO modules.
• Comprehensive protocol coverage for Ethernet, OTN and FlexO.

Highly Integrated Network Protocol Analysis Test Platform

The platform uses a modular triple-slot design for flexible configuration of multiple test modules. It supports simultaneous multi-port and mixed-rate testing, including hybrid combinations such as QSFP-DD, SFP-DD, CFP2-DCO, OSFP and QSFP-DD modules.

• Hybrid multi-port configurations for QSFP-DD, SFP-DD and CFP2-DCO modules.
• Hybrid OSFP and QSFP-DD module combinations for high-density testing.
• Rich interface support for 12 ports and 14 optical module types.
• Power supply and cooling design for concurrent multi-800ZR testing.

Simple, Efficient and User-Friendly

The fully graphical intelligent software platform retains a familiar user interface while providing comprehensive monitoring and testing capabilities. It is designed for efficient setup, single-page result display and practical lab operation.

• User-friendly GUI and fully graphical intelligent software platform.
• Single-page display for key functions and results.
• High testing efficiency with simplified setup workflow.
• Remote and automated operation support for lab integration.

Ideal Testing Platform for OTN and DCI Equipment

RN-OTN-8800 supports full-rate Ethernet services from 800GE to 10GE, as well as 800G OTN, FlexO and OTUCn optical transport services. It is suitable for transponder, muxponder, DCI equipment and coherent optical module validation.

• Protocol coverage for Ethernet, OTN and FlexO, including first- and second-order OTN multiplexing.
• Single tester for transponder and muxponder tests.
• Coherent optical module testing for CFP2-DCO, QSFP-DD, OSFP, 800ZR, ZR+ and OpenROADM.
• CMIS compliance testing with 1,700+ functional tests.

Simple, Efficient, and User-Friendly

The latest fully graphical intelligent software platform keeps operation intuitive while improving test efficiency, visibility and workflow consistency across monitoring and protocol-analysis tasks.

Software: Fully Graphical Intelligent Software Platform

RN-OTN-8800 is equipped with a fully graphical intelligent software platform. It keeps the familiar human-machine interaction style while integrating system monitoring and comprehensive test functions into one workflow.

• Integrated design: no external PC or additional software is required; connect a touch display with one cable and start testing immediately.
• Simple GUI operation with an efficient graphical workflow.
• Second-level test mode switching improves lab efficiency.
• Unified results dashboard reduces tab switching and improves analysis efficiency.
• Multi-user resource sharing with independent and isolated port resources.
• Remote access through VNC, Web and other methods.
• Application-level APIs for workflow automation and third-party integration.
• English and Chinese UI support.

Main Technical Specifications

Item	Technical Parameters
Optional interfaces	800G CFP2, 800G OSFP, 800G QSFP-DD and 100G SFP-DD; PAM4 and NRZ compatibility depending on module type
Interface signal and rate	PAM4: 53-112 Gb/s; NRZ: 10.3125-28.08 Gb/s
Maximum slots	3
Maximum bandwidth per slot	3.2T (4 x 800G)
Maximum system test bandwidth	9.6T
Maximum parallel test ports	12 x 800G
Coherent module testing	800G, 400G, 200G and 100G; CFP2, OSFP, QSFP-DD and QSFP28; 800ZR/ZR+, 400ZR/ZR+, 100ZR/ZR+, OpenZR+ and OpenROADM
Optical module validation	Voltage, current, power and temperature monitoring; alarm detection; pin control; multi-rate I2C access
CMIS management interface	CMIS 3.0-5.3 compliance test suite with 1,700+ test cases
Operating system	Linux
Automation testing	Python APIs
Reports	PDF, HTML, Excel and CSV
Display	15-inch 1920 x 1080 touch screen via one Type-C cable
Peripheral interfaces	1 x RJ45, 4 x USB, 1 x Type-C, 1 x HDMI
Power input	AC 100-240 V, 50-60 Hz

Ethernet Test Specifications

Item	Technical Parameters
Ethernet protocols and rates	800GE, 400GE, 200GE, 100GE, 50GE, 25GE and 10GE combinations depending on module/lane configuration
Unframed BERT	Supported
PRBS patterns	PAM4: PRBS-11Q/13Q/15Q/23Q/31Q; NRZ: PRBS-7/9/11/13/15/23/31; 64-bit user-defined patterns
FEC analysis	Correctable and uncorrectable symbol error analysis, FEC error insertion, FEC margin and symbol error distribution
Traffic bandwidth adjustment	0.01-100%
Frequency offset adjustment	+/-500 ppm
Receive frequency accuracy	0.1 ppm
Latency accuracy	1 ns
Service disruption time	Maximum, minimum, last and average disruption time plus disruption count
Alarm insertion and monitoring	PHY, PCS and MAC layers
Frame configuration	MAC, VLAN, MPLS, UDP, IPv4, IPv6 and user-defined frames
RFC 2544	Throughput, latency, frame loss and back-to-back testing

OTN Test Specifications

Item	Technical Parameters
OTN protocols and rates	800G FOIC 1.1 / OTL 4.1; 400G/200G/100G FlexO FOIC 1.2; 100G FlexO FOIC 1.4; 100G OTU4 OTL 4.2/4.4; 10G OTU2/2e/1e
Frequency offset adjustment	+/-100 ppm
Receive frequency accuracy	1 ppm
FEC analysis	Correctable and uncorrectable symbol error analysis plus FEC error insertion
OTL functions	Alarm detection and insertion
FlexO functions	Alarm and performance monitoring, GID/IID configuration, RPF alarm insertion and mapping
OTUCn functions	Alarm and performance monitoring
Overhead/alarm monitoring	OTU, ODU and OPU layers
OTN latency	PM and TCM1-TCM6 latency measurement
Service disruption time	Maximum, minimum, last and average disruption time plus disruption count
OTN multiplexing	1-stage and 2-stage OTN multiplexing
OTN mapping	GFP, BMP and GMP mapping modes
GFP functions	UPI/PTI configuration, FCS mode, alarm and performance monitoring

General Specifications

Item	Technical Parameters
Dimensions (W x H x D)	440 x 94 x 454 mm
Weight	12 kg
Operating temperature	0 C to +35 C
Storage temperature	-20 C to +60 C
Humidity	10% to 80%, non-condensing
Warranty	1 year